Zanussi ZBT23420SA 用户手册

Never use sharp metal tools to

scrape off frost from the evaporator

as you could damage it. Do not use

a mechanical device or any artificial

means to speed up the thawing

process other than those

recommended by the manufacturer.

A temperature rise of the frozen food

packs, during defrosting, may

shorten their safe storage life.

About 12 hours prior to defrosting,

set a lower temperature, in order to

build up sufficient chill reserve for

the interruption in operation.

A certain amount of frost will always form on the

freezer shelves and around the top

compartment.
Defrost the freezer when the frost layer reaches

a thickness of about 3-5 mm.
1. Switch off the appliance, or pull out

electrical plug from the wall socket.

2. Remove any stored food, wrap it in several

layers of newspaper and put it in a cool

place. 

Do not touch frozen goods with

wet hands. Hands can freeze to

the goods.

3. Leave the door open and insert the plastic

scraper in the appropriate seating at the

bottom centre, placing a basin underneath

to collect the defrost water.

In order to speed up the defrosting process,

place a pot of warm water in the freezer

compartment. In addition, remove pieces of

ice that break away before defrosting is

complete.

4. When defrosting is completed, dry the

interior thoroughly and keep the scraper for

future use.

5. Switch on the appliance.

After three hours reload the previously removed

food into the freezer compartment.

When the appliance is not in use for long

periods, take the following precautions:
1. Disconnect the appliance from electricity

supply.

2. Remove all food.

3. Clean the appliance and all accessories.

4. Leave the door/doors open to prevent

unpleasant smells.

If the cabinet will be kept on, ask

somebody to check it once in a

while to prevent the food inside from

spoiling in case of a power failure.

Refer to Safety chapters.

The appliance does not operate.

The appliance is switched off.

Switch on the appliance.

 

The mains plug is not connec-

ted to the mains socket cor-

rectly.

Connect the mains plug to the

mains socket correctly.