Zanussi ZBT23420SA 用户手册

 

There is no voltage in the

mains socket.

Connect a different electrical appli-

ance to the mains socket. Contact

a qualified electrician.

The appliance is noisy.

The appliance is not supported

properly.

Check if the appliance stands sta-

ble.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

The compressor operates contin-

ually.

Temperature is set incorrectly.

Refer to "Operation" chapter.

 

Many food products were put

in at the same time.

Wait some hours and then check

the temperature again.

 

The room temperature is too

high.

Refer to climate class chart on the

rating plate.

 

Food products placed in the

appliance were too warm.

Allow food products to cool to

room temperature before storing.

The door is not closed correct-

ly.

Refer to "Closing the door".

Water flows inside the refrigera-

tor.

The water outlet is clogged.

Clean the water outlet.

Food products prevent that

water flows into the water col-

lector.

Make sure that food products do

not touch the rear plate.

Water flows on the floor.

The melting water outlet is not

connected to the evaporative

tray above the compressor.

Attach the melting water outlet to

the evaporative tray.

The temperature in the appliance

is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The door is not closed correct-

ly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products temperature

decrease to room temperature be-

fore storage.

Many food products are stored

at the same time.

Store less food products at the

same time.

The door has been opened of-

ten.

Open the door only if necessary.

There is no cold air circulation

in the appliance.

Make sure that there is cold air cir-

culation in the appliance.