Zanussi ZRA25600WA 用户手册

The appliance is noisy.

The appliance is not supported

properly.

Check if the appliance stands

stable.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

The compressor operates con-

tinually.

Temperature is set incorrectly.

Refer to "Operation" chapter.

 

Many food products to be fro-

zen were put in at the same

time.

Wait some hours and then

check the temperature again.

 

The room temperature is too

high.

Refer to climate class chart on

the rating plate.

 

Food products placed in the

appliance were too warm.

Allow food products to cool to

room temperature before stor-

ing.

The door is not closed correct-

ly.

Refer to "Closing the door".

Water flows on the rear plate

of the refrigerator.

During the automatic defrost-

ing process, frost melts on the

rear plate.

This is correct.

Water flows into the refrigera-

tor.

The water outlet is clogged.

Clean the water outlet.

Food products prevent that

water flows into the water col-

lector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor.

The melting water outlet is not

connected to the evaporative

tray above the compressor.

Attach the melting water outlet

to the evaporative tray.

Door is misaligned or interferes

with ventilation grill.

The appliance is not levelled.

Refer to "Levelling".

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed correct-

ly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products temper-

ature decrease to room tem-

perature before storage.

Many food products are stored

at the same time.

Store less food products at the

same time.