Zanussi ZCG43010WA 用户手册

• Push the knob for the top oven and turn

it clockwise to 

 to ignite the grill

burner.

• Push the knob for the main oven and

turn it counterclockwise to   to ignite

the main oven burner.

3. Keep the knob pushed for equal or less

than 15 seconds to let the thermocouple

warm up. If not, the gas flow is interrupted.

4. After ignition release the knob, close the

oven door and turn the knob to set the

necessary heat setting.

Do not push the knob for more than

15 seconds. If the oven burner does

not light after 15 seconds, release

the knob, turn it back to off position

and try to light the oven burner again

after minimum 1 minute.

In the absence of electricity you can

ignite the oven burner without an

electrical device. In this case open

the oven door, put the flame near the

hole in the bottom of the oven cavity,

turn the knob to the spark position

and push it down. Keep the knob for

the oven functions pushed for equal

or less than 15 seconds to let the

thermocouple warm up.

If the oven burner accidentally goes

out, turn the knob for the oven

functions to the off position and try

to light the burner again after

minimum 1 minute.

Check if the burner holes are not

blocked.

To put out the flame, turn the knob to the off

position.

When the appliance operates, the cooling fan

activates automatically to keep the surfaces of

the appliance cool. If you deactivate the

appliance, the cooling fan can continue to

operate until the appliance cools down.

If there is a defect in the cooling fan,

contact the Authorised Service

Centre.

Put the slide-in accessories between the guide

bars in the top / main oven on the necessary

shelf position.

The flame protection on the shelf

must point up.

Use the shelf with flame protection

only on the first and second shelf

position in the top oven and on all

shelf positions in the main oven.

Be careful when you remove the

accessories from a hot appliance.

There is a risk of burns.

The stopper in the top oven cavity keeps the

deep pan in the proper position. Do not push

the pan too deep into the cavity, because it may

cause a damage to the stoper or the deep pan.
You can use the trivet to roast larger pieces of

meat or poultry on one shelf position.
1. Put the trivet into the deep pan so that the

supports of the wire shelf point up.

2. Put the deep pan into the oven on the

necessary shelf position.

You can use the trivet to grill flat dishes in large

quantities and to toast.