Zanussi ZGG96624XA 用户手册

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

The pan supports are not resistant

to washing in a dishwasher. They

must be washed by hand.

1. Remove the pan supports to easily clean

the hob. 

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash

the pan supports by hand and dry them. If

necessary, remove stubborn stains with a

paste cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make

sure that the arms of the pan supports are

aligned with the centre of the burner.

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not, the

dirt can cause damage to the hob.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and some detergent. After

cleaning, rub the hob dry with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

and dry them carefully before you put them

back.

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent difficult

lighting and check that the burner crown holes

are not obstructed.

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

Refer to Safety chapters.

There is no spark when you try to

activate the spark generator.

The hob is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the hob is correctly con-

nected to the electrical supply.

 

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.