Cisco Cisco ONS 15600 Multiservice Switching Platform (MSSP) 安装指南

Although the activate task is not service affecting, Cisco recommends that you activate the new load 
during a maintenance window. 

Do not perform maintenance or provisioning activities during the activation task.

For BLSR rings only, a non-service affecting APS-CHAN-FAILURE alarm is raised on each of the nodes 
joined to an activating node in the ring during activation. After the activation completes for that node, 
the alarms will clear. 

Cisco recommends that the first node you activate be a LAN-connected node. This ensures that the new 
CTC JAR files will download to your workstation as quickly as possible.

If CTC is not already running, start CTC.

In CTC node view, click the Maintenance tab and then click the Software button.

Verify that the version in the Protect Version column is R8.0.

Click the Activate button. The Activate dialog box appears with a warning message indicating that you 
should perform a database backup.

Complete one of the following:

If you have not backed up the database for the Working TSC B, click No. Complete the 

. When you have completed the procedure, 

return to 

 in this task.

If you have backed up the database for the Working TSC B, click Yes to proceed with the activation. 
The Download Status column shows: 

This task activates Software R8.0 in each node in the network. Activating 
the software load downloads the software to the standby TSC

1

.

1.

If you have downloaded the software into the protect side of the TSC card and want to activate (or revert) it at a later time, 
the Activate (or Revert) buttons may be grayed out. This occurs when the Cisco ONS 15600 node detects the software in the 
protect side of the TSC as invalid. In order to activate (or revert) the software, download the software to the TSC card once 
again.

PC or UNIX workstation

Required

Onsite or remote (but in the presence of the workstation)

Superuser