Cisco Cisco NSS030 Smart Storage External Power Adapter 發佈版本通知
Release Notes for Moodle PKG Package Firmware Version 1.9.9
3
Release Notes
STEP 4
In the Create a new database field, enter the name for the new database.
STEP 5
Click Create. The database is created and you are ready to install the PKG
package.
package.
NOTE
When you are configuring the PKG package and prompted to enter the database
name, enter the database name exactly as it was created in phpMyAdmin.
name, enter the database name exactly as it was created in phpMyAdmin.
If you are prompted for “database server” or “database host,” use localhost.
Localhost will sometimes automatically display as the default.
Localhost will sometimes automatically display as the default.
Firmware Requirements
The Cisco NSS 300 Series Smart Storage device should be running firmware
version 1.0.0 or higher. To update your firmware see,
version 1.0.0 or higher. To update your firmware see,
Downloading and Upgrading the Firmware
This procedure describes how to upgrade the firmware on the NSS 300 Series
Smart Storage devices from the Network Attached Storage (NAS) interface.
Smart Storage devices from the Network Attached Storage (NAS) interface.
!
CAUTION
As a precautionary measure, back up the NAS system configuration before
upgrading the firmware.
upgrading the firmware.
!
CAUTION
Do not upgrade the firmware over a WAN or Wi-Fi link since an interuption in service
can lead to corruption of the firmware upgrade process.
can lead to corruption of the firmware upgrade process.
From the Administration > Firmware Upgrade window, you can view the current
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.