Cisco Cisco UCS C3160 Rack Server 数据表
Cisco UCS C220 M4 High-Density Rack Server (Small Form Factor Disk Drive Model)
8
BASE SERVER STANDARD CAPABILITIES and FEATURES
BASE SERVER STANDARD CAPABILITIES and FEATURES
lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in
are provided in
.
Table 1 Capabilities and Features
Capability/Feature
Description
Chassis
One rack unit (1RU) chassis
CPU
One or two Intel® Xeon E5-2600 v3 or v4 series processor family CPUs
Chipset
Intel® C610 series chipset
Memory
24 slots for registered DIMMs (RDIMMs) or load-reduced DIMMs (LRDIMMs)
Multi-bit Error
Protection
This server supports multi-bit error protection.
Embedded NIC
Two embedded (on the motherboard) Intel i350 GbE ports, supporting the
following:
following:
■
Pre-Execution Boot (PXE boot)
■
iSCSI boot
■
Checksum and segmentation offload
■
NIC teaming
Expansion slots
■
Riser 1 (controlled by CPU 1):
• One full-height profile, 3/4-length slot with x24 connector and x16
lane
■
Riser 2 (controlled by CPU 2):
• One half-height profile, half-length slot with x24 connector and x16
lane, or
• One half-height profile, half-length slot with x24 connector and x8
lane and two mini-SAS HD connectors that support two front-mount
PCIe Gen 3 NVMe SFF 2.5” drives.
■
Dedicated RAID controller slot (see
)
• An internal slot is reserved for use by the Cisco 12G SAS Modular RAID
controller or the Cisco 12 Gbps Modular SAS HBA.
Cisco Flexible Flash
drives
The server supports up to two internal 32 GB or two internal 64 GB Cisco
Flexible Flash drives (SD cards).
The second SD card is blank and can be used to mirror the first SD card. It
The second SD card is blank and can be used to mirror the first SD card. It
can be used to protect the Hypervisor Partition with RAID1.