Cisco Cisco ONS 15310-MA SDH Multiservice Platform 安装指南

Upgrading the Cisco ONS 15310-MA SDH to Release 9.2.1.3

OL-26732-01

DLP- U541 Set the Date and Time

Step 3

On Windows systems, delete cached files from your workstation in the following location:

C:\Documents and Settings\username\Application Data\Cisco\CTC.

Step 4

Reopen your browser. You should now be able to connect to CTC.

Step 5

Return to your originating procedure (NTP).

DLP-U541 Set the Date and Time

Note

This task is not applicable if you are using SNTP.

Step 1

If CTC is not already running, start CTC, using the IP address of the ONS 15310-MA SDH node.

Step 2

In CTC node view, click the Provisioning tab and then click the General button.

Step 3

Set the correct date and time, then click the Apply button.

Step 4

Repeat Steps

and

for each remaining node.

Step 5

Return to your originating procedure (NTP).

NTP-U483 Install Public-Key Security Certificate

Step 1

Log into CTC.

Purpose

If you are not using SNTP, the upgrade procedure can cause the date/time
setting to change. This task resets the date and time for each node.

Tools/Equipment

PC or UNIX workstation

Prerequisite Procedures None

Required/As Needed

As needed

Onsite/Remote

Onsite or remote (but in the presence of the workstation)

Security Level

Superuser

Purpose

This procedure installs the ITU Recommendation X.509 public-key
security certificate. The public-key certificate is required to run
Software R4.1 or later.

Tools/Equipment

None

Prerequisite Procedures This procedure is performed when logging into CTC. You cannot perform

it at any other time.

Required/As Needed

This procedure is required to run ONS 15310-MA SDH software.

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher