Cisco Cisco Compression Service Adapter for Cisco 7000 Series Routers 故障排查指南
Configuration and Overview of the Router Module
for the Catalyst 4500/4000 Family (WS−X4232−L3)
for the Catalyst 4500/4000 Family (WS−X4232−L3)
Document ID: 6198
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Architecture Overview
Configuration of the WS−X4232−L3
Supervisor Engine
Router
Access List Support on the WS−X4232−L3
Sample Configurations
Network Diagram
Switch Supervisor Engine Configuration
Router Module Configuration
Troubleshoot
Session from Supervisor to 4232−L3 Module Does Not Work After It Runs for Awhile
Periodic TFTP Requests from 4232−L3
Conclusion and Tips
Related Information
Prerequisites
Requirements
Components Used
Conventions
Architecture Overview
Configuration of the WS−X4232−L3
Supervisor Engine
Router
Access List Support on the WS−X4232−L3
Sample Configurations
Network Diagram
Switch Supervisor Engine Configuration
Router Module Configuration
Troubleshoot
Session from Supervisor to 4232−L3 Module Does Not Work After It Runs for Awhile
Periodic TFTP Requests from 4232−L3
Conclusion and Tips
Related Information
Introduction
This document describes the WS−X4232−L3 router module for the Cisco Catalyst 4500/4000 Series
Switches. In addition to a description of the architecture and configuration of the WS−X4232−L3, this
document also provides a sample configuration that uses a Catalyst 4500/4000 Series Switch and the router
module.
Switches. In addition to a description of the architecture and configuration of the WS−X4232−L3, this
document also provides a sample configuration that uses a Catalyst 4500/4000 Series Switch and the router
module.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Cisco Catalyst OS (CatOS) release 5.5(1) or later
•
Cisco IOS® Software Release 12.0(7)W5(15d)
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.