Cisco Cisco Compression Service Adapter for Cisco 7000 Series Routers 安装指南

下载
页码 62
 
Corporate Headquarters:
Copyright © 1997–2002. Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Data Encryption Service Adapter Installation and 
Configuration
Product Numbers: SA-Encrypt and SA-Encrypt=
This configuration note describes the installation and configuration of the data encryption service 
adapter, which is referred to throughout this publication collectively as ESA (Product Numbers 
SA-Encrypt and SA-Encrypt=). 
The ESA is used in the Cisco 7204 and Cisco 7206 routers, and on the second-generation Versatile 
Interface Processor (VIP2-40 specifically) in all Cisco 7500 series routers, and on the VIP2-40 in 
Cisco 7000 series routers that have the 7000 Series Route Switch Processor (RSP7000) and 7000 Series 
Chassis Interface (RSP7000CI) installed.
Note
For VIP2-40 users, use this configuration note in conjunction with the configuration note 
Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (Document 
Number 78-2658-xx), which shipped with your VIP2-40. 
For Cisco 7200 series router users, use this configuration note in conjunction with the Cisco 72xx 
Installation and Configuration Guide
 that shipped with your Cisco 7200 series router.
For additional descriptions of interface subcommands and the configuration options available for 
VIP2-40-related interfaces, refer to the appropriate Cisco IOS software configuration and command 
reference publications listed in the section “
” on page 2.
Caution
To ensure compliance with U.S. export laws and regulations for 56-bit DES, and to prevent problems 
later on, refer to the section “
,” on page 7, for specific and important information.