Cisco Cisco NSS030 Smart Storage External Power Adapter 發佈版本通知
Release Notes for Cisco Smart Storage Optware PKG Package Version 0.99.163
3
Release Notes
Firmware Requirements
The Cisco NSS 300 Series Smart Storage device should be running firmware
version 1.0.0 or higher. To update your firmware see,
version 1.0.0 or higher. To update your firmware see,
Downloading and Upgrading the Firmware
This procedure describes how to upgrade the firmware on the NSS 300 Series
Smart Storage devices from the Network Attached Storage (NAS) interface.
Smart Storage devices from the Network Attached Storage (NAS) interface.
!
CAUTION
As a precautionary measure, back up the NAS system configuration before
upgrading the firmware.
upgrading the firmware.
!
CAUTION
Do not upgrade the firmware over a WAN or Wi-Fi link since an interuption in service
can lead to corruption of the firmware upgrade process.
can lead to corruption of the firmware upgrade process.
From the Administration > Firmware Upgrade window, you can view the current
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
To upgrade the firmware:
STEP 1
Click Administration > Firmware Upgrade from the Navigation menu. The
Firmware Upgrade window appears. The current firmware version is displayed.
Firmware Upgrade window appears. The current firmware version is displayed.
STEP 2
Click Browse to locate the correct firmware file for the system update. Before
updating the system, verify that the product model and firmware version you are
going to update is correct.
updating the system, verify that the product model and firmware version you are
going to update is correct.
STEP 3
Click Update The System.