Cisco Cisco NSS030 Smart Storage External Power Adapter 發佈版本通知
Release Notes for MediaWiki PKG Package Firmware Version 1.16.5
3
Release Notes
NOTE
When you are configuring a PKG package, if you are prompted to enter the
database username and password, enter root for username and admin for
password.
database username and password, enter root for username and admin for
password.
STEP 4
In the Create a new database field, enter the name for the new database.
STEP 5
Click Create. The database is created and you are ready to install the PKG
package.
package.
NOTE
When you are configuring the PKG package and prompted to enter the database
name, enter the database name exactly as it was created in phpMyAdmin.
name, enter the database name exactly as it was created in phpMyAdmin.
If you are prompted for “database server” or “database host,” use localhost.
Localhost will sometimes automatically display as the default.
Localhost will sometimes automatically display as the default.
Firmware Requirements
The Cisco NSS300 Series Smart Storage device should be running firmware
version 1.0.0 or higher. To update your firmware see,
version 1.0.0 or higher. To update your firmware see,
Downloading and Upgrading the Firmware
This procedure describes how to upgrade the firmware on the NSS300 Series
Smart Storage devices from the Network Attached Storage (NAS) interface.
Smart Storage devices from the Network Attached Storage (NAS) interface.
!
CAUTION
As a precautionary measure, back up the NAS system configuration before
upgrading the firmware.
upgrading the firmware.
!
CAUTION
Do not upgrade the firmware over a WAN or Wi-Fi link since an interruption in
service can lead to corruption of the firmware upgrade process.
service can lead to corruption of the firmware upgrade process.