Cisco Cisco Unified MeetingPlace Audio Server 维护手册

4-26

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)

OL-

Chapter 4 Configuring the 8112 Server

Configuring the system

Figure 4-31 timezone Command Selection and Confirmation Screen

Step 5

Enter

and press Enter to confirm your selection, or

and press Enter to abort your selection. The line

“DONE” and the tech$ prompt appear.

Configuring blades

This section describes how to configure blades. There are four types of blades:

•

T1 Smart Blade

•

Multi Access Blade (MA-16)

•

Multi Access Blade (MA-4)

•

Smart Blade

Refer to

Table 4-3

for an explanation of each.

Warning

Mixing protocols is not supported except in combination with IP ports. For example, a system cannot
have both T1 and E1 ports configured but it can have T1 (either PRI or CAS) and IP ports or E1 and IP
ports. Also, a system cannot have both T1 CAS and T1 PRI ports configured. Refer to

Table 4-4

Select: 7

The local time zone (PST) is 480 minutes west of GMT

Daylight savings time policy: US/Canada

Please confirm (y/n):

Table 4-3

Blade Types

Blade Type

Explanation

T1 Smart Blade

Provides both PRC and MSC functionality along with
necessary trunk interface functionality for digital T1 CAS
telephone lines.

Multi Access
Blade (MA-16
and MA-4)

Provides the necessary trunk interface card functionality for
E1 digital telephony, T1 PRI functionality, and IP-based
telephony. The Multi Access Blade supports both Euro
ISDN and QSIG telephony protocols, T1 PRI support for
North America (United States and Canada), and G.711 and
G.729a audio encoding for IP.

MA-16: Supports up to 16 spans (up to 480 IP ports)

MA-4: Supports up to 4 spans (up to 120 IP ports)

Smart Blade

Provides both PRC and MSC functionality in a single card.