Cisco Cisco Unified MeetingPlace for IBM Lotus Notes 快速安装指南
Configuring Call Control for Cisco Unified MeetingPlace
How to Configure Call Control for Voice Conferencing
10
Procedure
Step 1
Go to http://ccm-server/ccmadmin/main.asp, where ccm-server is the fully-qualified domain name or
IP address of the Cisco Unified Communications Manager server.
IP address of the Cisco Unified Communications Manager server.
Step 2
Log in with your Cisco Unified Communications Manager administrator username and password.
Step 3
Select Device > Trunk.
Step 4
Select Add New.
Step 5
In the Trunk type field, select Inter-Cluster Trunk (Non-Gatekeeper Controlled).
Step 6
Select Next.
Step 7
Configure the fields described in
.
Table 4
Fields for Adding an Inter-Cluster Trunk in Cisco Unified Communications Manager
Field
Action
Device Name
Enter a unique identifier for this trunk, for example:
•
If you are configuring Cisco Unified Communications Manager 4.x or 5.x,
then enter the name or IP address of the Cisco Unified
Communications Manager 6.1 (or a later release) server that provides
front-end signaling for Cisco Unified MeetingPlace.
then enter the name or IP address of the Cisco Unified
Communications Manager 6.1 (or a later release) server that provides
front-end signaling for Cisco Unified MeetingPlace.
•
If you are configuring Cisco Unified Communications Manager Release 6.1
(or a later release), then enter the name or IP address of the Cisco Unified
Communications Manager 4.x or 5.x server.
(or a later release), then enter the name or IP address of the Cisco Unified
Communications Manager 4.x or 5.x server.
Device Pool
If no device pools are defined, select Default.
If device pools are already defined, then either create a new device pool or choose
an existing device pool for a region with a codec that is compatible with the
conferencing gateway (or bridge).
an existing device pool for a region with a codec that is compatible with the
conferencing gateway (or bridge).
Media Resource Group List
(Optional) If Cisco Unified MeetingPlace–supported endpoints are registered to
this Cisco Unified Communications Manager, then we recommend that you
choose one of the following to prevent conference calls from being disrupted by
music whenever a user places a call on hold:
this Cisco Unified Communications Manager, then we recommend that you
choose one of the following to prevent conference calls from being disrupted by
music whenever a user places a call on hold:
•
Default value of <None>.
•
A Media Resource Group List that does not contain music on hold resources.
Note
See
in the
module.
Media Termination Point Required
Uncheck this check box.
Server 1 IP Address/Host Name
Identify the target server, specifically:
•
If you are configuring Cisco Unified Communications Manager 4.x or 5.x,
then specify the Cisco Unified Communications Manager 6.1 (or a later
release) server that provides front-end signaling for Cisco Unified
MeetingPlace.
then specify the Cisco Unified Communications Manager 6.1 (or a later
release) server that provides front-end signaling for Cisco Unified
MeetingPlace.
•
If you are configuring Cisco Unified Communications Manager Release 6.1
(or a later release), then specify the Cisco Unified Communications Manager
4.x or 5.x server.
(or a later release), then specify the Cisco Unified Communications Manager
4.x or 5.x server.