Cisco Headend Digital Broadband Delivery System 安装指南
Chapter 2 Installing the Alarm Manager Software
42
78-745262-01Rev C
4 Type df -n and then press Enter. A list of the mounted filesystems appears.
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
5 Type cd /export/home and then press Enter. The /export/home directory
becomes the working directory.
6 Type mkdir stageNMI and then press Enter. The system creates the stageNMI
directory.
7 Type cd /cdrom/cdrom0 and then press Enter. The /cdrom/cdrom0 directory
becomes the working directory.
8 Type
tar -cvf /export/home/stageNMI/nmipackage.tar SAInmi install_nmi
nmiadmin and then press Enter.
Result: The system creates the nmipackage.tar file in the
Result: The system creates the nmipackage.tar file in the
/export/home/stageNMI directory.
9 Type cd /export/home/stageNMI and then press Enter. The
/export/home/stageNMI directory becomes the working directory.
10 Type eject cd and then press Enter.
11 Go to
11 Go to
Transferring the NMI Software From the Alarm Manager Server to the
DNCS (on page 42).
Transferring the NMI Software From the Alarm Manager Server to the DNCS
After staging the NMI software onto the Alarm Manager server, follow these
instructions to transfer the software from the Alarm Manager server to the DNCS.
1 Open an xterm window on the Alarm Manager server.
2 Type telnet [IP address of the DNCS] and then press Enter. A telnet session
1 Open an xterm window on the Alarm Manager server.
2 Type telnet [IP address of the DNCS] and then press Enter. A telnet session
opens on the DNCS.
Note: Substitute the IP address of the DNCS for [IP address of the DNCS].
Note: Substitute the IP address of the DNCS for [IP address of the DNCS].
3 Log in to the DNCS as dncs user.
4 Type cd /export/home and then press Enter. The /export/home directory
4 Type cd /export/home and then press Enter. The /export/home directory
becomes the working directory.
5 Type mkdir stageNMI and then press Enter. The system creates the stageNMI
directory.
6 Type exit and then press Enter. The telnet session into the DNCS closes and
returns you to the Alarm Manager server.
7 Type pwd and then press Enter to confirm that you are in the
/export/home/stageNMI directory of the Alarm Manager server.
8 Type ftp [DNCS IP address] and then press Enter. The system initiates an ftp
session between the Alarm Manager server and the DNCS.
Note: Substitute the IP address of the DNCS for [DNCS IP address].
Note: Substitute the IP address of the DNCS for [DNCS IP address].