Cisco Cisco UCS C460 M4 Rack Server 数据表
Cisco UCS C200 M2 High-Density SFF Drive Rack-Mount Server
CONFIGURING the SERVER
23
STEP 7
ORDER OPTIONAL NETWORK CARD ACCESSORIES
Copper twinax cables and SFP optical modules may be ordered to support the two-port network cards that
are available with the server.
are available with the server.
Choose Optional Twinax Cables
Copper twinax cables are listed in
. You can choose cable lengths of 1, 3, 5, 7, or 10
meters. The two longer cables (7 and 10 meters) are active, which means that they contain
active components within the SFP+ housing to improve signal quality.
active components within the SFP+ housing to improve signal quality.
Approved Configurations
(1) Choose Up to Two Twinax Cables for Each Network Card Ordered
■
You may choose one or two twinax cables for each network card ordered. The cables can be
different lengths; however, you would normally order two cables of equal lengths to connect
to the primary and redundant network switching equipment.
different lengths; however, you would normally order two cables of equal lengths to connect
to the primary and redundant network switching equipment.
Caveats
The twinax cables listed in
can be ordered only for the following PCIe cards:
— N2XX-ACPCI01 (Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps)
— UCS-PCIE-BSFP (Broadcom 57712)
— N2XX-ABPCI02 (Broadcom 57711)
— N2XX-AEPCI01 (Emulex OCe10102-F)
— N2XX-AIPCI01 (Intel Dual Port Ethernet X520)
— N2XX-AQPCI01 (Qlogic QLE 8152-CNA)
Table 8 Available Twinax Cables
Product ID (PID)
PID Description
SFP-H10GB-CU1M
10GBASE-CU SFP+ Cable (1 M)
SFP-H10GB-CU3M
10GBASE-CU SFP+ Cable (3 M)
SFP-H10GB-CU5M
10GBASE-CU SFP+ Cable (5 M)
SFP-H10GB-ACU7M
10GBASE-CU SFP+ Cable (7 M)
SFP-H10GB-ACU10M
10GBASE-CU SFP+ Cable (10 M)