Cisco Cisco UCS B440 M1 High-Performance Blade Server 数据表

The Cisco® UCS B460 M4 E7 v3 High-Performance Blade Server (

) is a four-socket, full-width 

double-high blade server supporting the Intel® Xeon® E7-4800 v3 and E7-8800 v3 series processor family 
CPUs, with up to 6 terabytes (TB) of double-data-rate 3 (DDR3) memory in 96 slots, up to 4 small form 
factor (SFF), hot-swappable 

1

 drive bays for hard disk drives (HDDs) or solid state drives (SSDs), four 

dual-port and two quad-port mezzanine card connections for up to 320 Gbps aggregate I/O bandwidth. The 
Cisco UCS B460 M4 E7 v3 server is designed to power the most demanding enterprise applications.

As shown in 

, the B460 M4 E7 v3 server consists of two Scalable M4 Blade Modules and a Scalability 

Connector that cross-connects the two Blade Modules and allows them to function as a single server. The 
Blade Module on the bottom is the “Master” and the Blade Module on the top is the “Slave.”

The server is controlled with UCS Manager (UCSM) version 2.2(5f).

1. Hot-swap replacement means that you do not have to precondition or shut down the component in software 

before you remove it.