Cisco Cisco MDS 9000 NX-OS Software Release 6.2 發佈版本通知

Use the software download procedure to upgrade to a later version, or downgrade to an earlier version, of an operating system. 
This section describes the software download process for the Cisco MDS NX-OS software and includes the following topics:

To determine the version of Cisco MDS NX-OS or SAN-OS software currently running on a Cisco MDS 9000 Family switch 
using the CLI, log in to the switch and enter the show version EXEC command.

To determine the version of Cisco MDS NX-OS or SAN-OS software currently running on a Cisco MDS 9000 Family switch 
using Cisco DCNM for SAN, view the Switches tab in the Information pane, locate the switch using the IP address, logical 
name, or WWN, and check its version in the Release column.

DS-X9304-18K9

18/4-Port Multiservice Module 
(MSM-18/4) 

Yes

Yes

Yes

Yes

DS-X9112

12-port 4-Gbps Fibre Channel 
Switching Module

Yes

Yes

Yes

Yes

DS-X9124

24-port 4-Gbps Fibre Channel 
Switching Module

Yes

Yes

Yes

Yes

DS-X9148

48-port 4-Gbps Fibre Channel 
Switching Module

Yes

Yes

Yes

Yes

DS-X9704

4-port 10-Gbps Fibre Channel 
Switching Module

Yes

Yes

Yes

Yes

1.

Requires DS-13SLT-FAB3 or DS-13SLT-FAB2 in the MDS 9513.

2.

Requires the Supervisor-2A module.

3.

Requires DS-13SLT-FAB2 in the MDS 9513.