Cisco Cisco IOS Software Release 12.2(27)SBC
Enhanced Object Tracking
show track
5
show track
To display information about objects that are tracked by the tracking process, use the show track
command in privileged EXEC mode.
command in privileged EXEC mode.
show track [object-number [brief] | interface [brief] | ip route [brief] | resolution | timers]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use this command to display information about objects that are tracked by the tracking process. When
no arguments or keywords are specified, information for all objects is displayed.
no arguments or keywords are specified, information for all objects is displayed.
Examples
The following example shows information about the state of IP routing on the interface that is being
tracked:
tracked:
Router# show track 1
Track 1
Interface Ethernet0/2 ip routing
IP routing is Down (no IP addr)
1 change, last change 00:01:08
Tracked by:
HSRP Ethernet0/3 1
object-number
(Optional) Object number that represents the object to be tracked. The range is
from 1 to 500.
from 1 to 500.
brief
(Optional) Displays a single line of information related to the preceding
argument or keyword.
argument or keyword.
interface
(Optional) Displays tracked interface objects.
ip route
(Optional) Displays tracked IP-route objects.
resolution
(Optional) Displays resolution of tracked parameters.
timers
(Optional) Displays polling interval timers.
Release
Modification
12.2(15)T
This command was introduced.
12.3(8)T
The output was enhanced to include the track-list objects.
12.2(25)S
This command was integrated into Cisco IOS Release 12.2(25)S.
12.4(2)T
The output was enhanced to display stub objects.
12.2(28)SB
This command was integrated into Cisco IOS Release 12.2(28)SB.