Cisco Cisco ASA 5585-X with FirePOWER SSP-20 安装指南

Cisco ASA 5585-X Quick Start Guide

5. Launch ASDM

 

If you do not use the Management 0/0 for ASA management, you need to configure a data interface for 
management. Do one of the following, then recable the computer so it is on the new management network:

Connect to the console port to configure a data interface for management with CLI. See the Getting Started 
chapter in the general operations configuration guide for detailed steps.

Temporarily connect to Management 0/0, launch ASDM (see 

), and configure a 

data interface for management.

If you are using the fiber interfaces, you need an SFP+ module for 10-Gigabit Ethernet (a license may be 
required) or an SFP module for Gigabit Ethernet. (SFP or SFP+ modules are not included.)

The interfaces available depend on your model. See the 

 for more information.

Check the LINK/ACT indicators to verify interface connectivity.

For software module configuration, see the 

,

, or 

.

5. Launch ASDM

Using ASDM, you can use wizards to configure basic and advanced features. See the 

 on 

Cisco.com for the requirements to run ASDM.

On the computer connected to the ASA Management 0/0 interface, launch a web browser.

In the Address field, enter the following URL: https://192.168.1.1/admin. The Cisco ASDM web page 
appears.

Click one of the available options: Install ASDM Launcher, Run ASDM, or Run Startup Wizard.

Follow the onscreen instructions to launch ASDM according to the option you chose. The Cisco ASDM-IDM 
Launcher appears.

 If you choose to click Install ASDM Launcher, in some cases you need to install an identity certificate 

for the ASA and a separate certificate for the ASA FirePOWER module according to 

.

(Optional) Slot 1 module, multiple types available.

Slot 0 ASA SSP

ASA SSP Management 0/0 interface (RJ-45)

Secure Network

Management PC

Unsecure Network

3

00016