Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 安装指南

Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access 
point (see 

). 

Ensure the front of the access point is vertical, and tighten the four bolts to 13 to 15 ft lbs 
(17.6 to 20.3 Nm).

When using the optional Cisco external omnidirectional antennas, connect them to the access point as 
shown in 

. Hand-tighten the antennas to the access point.

Continue with the 

 and the 

When mounting the access point on a cable strand, you must use the optional strand mount kit. The kit 
contains several parts that you should assemble before mounting on a cable strand. To install the access 
point to a cable strand, you need to perform these operations:

Attach cable clamps to the clamp bracket

Attach the strand bracket to the access point

Attach the clamp bracket to the fiber or cable strand

Attach the strand bracket (with access point) to the clamp bracket

Attach antennas 

Attach a ground wire

Connect cables and power to the access point