Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 安装指南

To close the access point cover, follow these steps:

When closing the access point cover, be careful not to pinch internal wires. 

Carefully position the cover flush with all sides of the access point, then slowly hand-tighten each bolt. 

When all bolts are hand-tightened, use a 13 mm closed-end wrench or socket to partially tighten the bolts 
in the tightening sequence shown in 

. Tighten each bolt to 3 to 4 ft lbs (0.34 to 0.45 Nm).

Repeat 

 using the same tightening sequence to fully tighten each bolt to 6 to 7 ft lbs 

(0.68 to 0.79 Nm).