Cisco Cisco Web Security Appliance S360 安装指南
1-9
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 1 Installing Cisco x90 Series Content Security Appliances
Installing Cisco x90 Series Content Security Appliances In a Rack
Figure 1-6
Attaching the Cable Management Arm to the Rear of the Slide Rails
Reversing the Cable Management Arm (Optional)
Step 1
Rotate the entire CMA assembly 180 degrees. The plastic cable guides must remain pointing upward.
Step 2
Flip the tabs at the end of each CMA arm so that they point toward the rear of the appliance.
Step 3
Pivot the tab that is at the end of the width-adjustment slider. Depress and hold the metal button on the
outside of the tab and pivot the tab 180 degrees so that it points toward the rear of the appliance.
outside of the tab and pivot the tab 180 degrees so that it points toward the rear of the appliance.
1
CMA tab on arm farthest from the appliance
and end of stationary outer slide rail
and end of stationary outer slide rail
3
CMA tab on width-adjustment slider and end
of stationary outer slide rail
of stationary outer slide rail
2
CMA tab on arm closest to the appliance and
end of inner slide rail attached to the
appliance
end of inner slide rail attached to the
appliance
4
Rear of the appliance
352584
1
4
2
3