Cisco Cisco Identity Services Engine 1.0.4 信息指南

Cisco Identity Services Engine Network Component Compatibility, Release 1.0.4

OL-25483-01

Supported External Identity Sources

Table 2

lists the external identity sources supported with Cisco ISE.

Catalyst 3560-E, ISR
EtherSwitch ES3

IOS v12.2(52)SE

Yes

Catalyst 3560-X

IOS v12.2(52)SE

Yes

Catalyst 3750

IOS v12.2(52)SE

Yes

Catalyst 3750-E

IOS v12.2(52)SE

Yes

Catalyst 3750 Metro

IOS v12.2(52)SE

Yes

Catalyst 3750-X

IOS v12.2(52)SE

Yes

Catalyst 4500

IOS v12.2(54)SG

Yes

Catalyst 6500

IOS v12.2(33)SX17

Yes

Data Center Switches

Catalyst 4900

IOS v12.2(54)SG

Yes

Nexus 7000

Wireless (An ISE Inline Posture node is required if the WLC does not support CoA as discussed in Footnote #4. WLCs with the code specified
in this table do support CoA without an ISE Inline Posture node)

Wireless LAN Controller
(WLC) 2100, 4400, and
5500 Series

7.0.116.0

Yes

—

WiSM Blade for 6500

7.0.116.0

Yes

—

WLC for ISR (ISR2 ISM,
SRE700, and SRE900)

7.0.116.0

Yes

—

WLC for 3750

7.0.116.0

Yes

—

For 802.1X authentications, you need IOS version 12.2(55)SE3.

Does not support posture and profiling services.

SGA only

Wireless LAN Controllers (WLCs) do not support downloadable ACLs (dACLs), but support named ACLs. Autonomous AP deployments do not support
the requirements for Inline Posture Node as they do not send Framed-IP-Address. Profiling services are supported for 802.1X-authenticated WLANs
starting from WLC release 7.0.116.0 and for MAB-authenticated WLANs starting from WLC 7.2.110.0. FlexConnect, previously known as Hybrid
Remote Edge Access Point (HREAP) mode, is supported with central authentication configuration deployment starting from WLC 7.2.110.0. For
additional details regarding FlexConnect support, refer to the release notes for the applicable wireless controller platform.

An issue has been observed during wireless login scenarios where the WLC is running firmware version 7.0.116.0. Unless you require new features
available only in version 7.0.116.0, Cisco recommends returning your WLC firmware version to 7.0.98.218. For more information, see the

Release Notes

for the Cisco Identity Services Engine, Release 1.0.4

Table 1

Supported Network Access Devices (continued)

Device

Minimum OS Version

MAB

802.1X

Web Auth

Session
CoA

VLAN

DACL SGA

Table 2

Supported External Identity Sources

External Identity Source

OS/Version

Active Directory

Microsoft Windows Active Directory 2003

32-bit only