Cisco Cisco AP541N Wireless Access Point 维护手册

Getting Started

Connecting the Access Point to a PC

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

Display the Configuration Utility by Using
Cisco Configuration Assistant 2.1 or higher

Use Cisco Configuration Assistant 2.1 or higher (CCA) to configure the access
point when it is deployed in a Cisco Smart Business Communications System
(SBCS) network with a UC520 or SR520.

This procedure assumes you are familiar with CCA. You can find additional
information about CCA at

http://www.cisco.com/en/US/products/ps7287/

tsd_products_support_series_home.html

To configure the access point by using CCA:

STEP 1

Connect the Ethernet port on the access point to a switch port on a SBCS device.

STEP 2

Power on the Cisco AP541N.

STEP 3

Connect a PC with CCA installed to any access switch port on the UC520 or
SR520.

STEP 4

Create a new CCA site by entering a name and the IP address of the UC520 or
SR520.

STEP 5

Connect to the CCA site by using the appropriate login credentials.

STEP 6

Click Window > Topology View.

195058

Internet

DHCP client