Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point 维护手册
4
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
52
LAN
This chapter describes how to configure the port, network, and clock settings of
the WAP devices.
the WAP devices.
It includes these topics:
•
•
•
•
Port Settings
The Port Settings page enables you to view and configure settings for the port
that physically connects the WAP device to a local area network.
that physically connects the WAP device to a local area network.
To view and configure LAN settings:
STEP 1
Select LAN > Port Settings in the navigation area.
The Operational Status area shows the type of port used for the LAN port and the
Link characteristics, as configured in the Administrative Settings area. If the
settings change through configuration or auto negotiation, you can click Refresh to
show the latest settings.
Link characteristics, as configured in the Administrative Settings area. If the
settings change through configuration or auto negotiation, you can click Refresh to
show the latest settings.
STEP 2
Enable or disable Auto Negotiation.
•
When enabled, the port negotiates with its link partner to set the fastest link
speed and duplex mode available.
speed and duplex mode available.
•
When disabled, you can manually configure the port speed and duplex
mode.
mode.