Cisco Headend System Release 2.5 设计指南
Verify that the DIS Flag is Enabled
740029 Rev B
3
5 In the Select Option area, click the Open option if it is not already selected.
6 Do you know the MAC address for the DHCT you want to check?
6 Do you know the MAC address for the DHCT you want to check?
If yes, click the By MAC Address option, then click in the corresponding
field, and type the MAC address for the DHCT you want to check.
Go to step 7.
If no, click the By Serial Number option, then click in the corresponding
field, and type the serial number for the DHCT you want to check.
Go to step 7.
7 Click Continue. The Set Up DHCT window opens for the DHCT you want to
check.
8 Click the Secure Services tab.
9 Does a check mark appear in the DIS Enable field?
If yes, click the DIS Enable option to turn the DIS enable flag off, then click
Save. Go to step 10.
If no, then the DIS Enable option is already off. Click Cancel to exit the
Secure Services tab, then go to step 10.
10 Repeat steps 4 through 9 on the other two DHCTs in your test group to ensure
that the DIS Enable flag is turned off.