Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 安装指南
Chapter 3 USRM Web Interface
248
4039132 Rev B
McmisServer - STB Configuration Page
This page allows the operator to configure the set-top box configuration. This
configuration is generated to the set-top box in the mini-carousel stream.
configuration is generated to the set-top box in the mini-carousel stream.
Parameters
The following table explains the McmisServer - STB Configuration page parameters.
Parameter
Description
StbReportInterval
The required interval for reporting set-top box last user
activity.
activity.
StbReadMCPInterval
The required interval for reading the mini-carousel. If set
to zero, the set-top box only reads the carousel upon
channel changes to, away from, and between SDV
programs.
to zero, the set-top box only reads the carousel upon
channel changes to, away from, and between SDV
programs.
StbMessageResponse
Timeout
Timeout
The SDV CCMIS response message timeout in
milliseconds.
milliseconds.
StbMaxRetries
The maximum retry count for re-sending SDV CCMIS
request messages.
request messages.
StbRetryInterval
The interval that specifies the length of time in
milliseconds that the set-top box waits before re-sending
SDV CCMIS request messages.
milliseconds that the set-top box waits before re-sending
SDV CCMIS request messages.
StbBandwidthReclaim
Timeout
Timeout
The length of time in seconds that the bandwidth reclaim
barker message is displayed by the set-top box.
barker message is displayed by the set-top box.