Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 安装指南
Chapter 3 USRM Web Interface
102
78-4021139-01 Rev D
HaPrimary - Standby Servers Page
Refer to HaPrimary - Network Config Page for an explanation of the high-
availability function.
The HaPrimary - Standby Servers page displays the status of the connected standby
The HaPrimary - Standby Servers page displays the status of the connected standby
servers. An entry is displayed for each connected standby server.
The following illustration shows the HaPrimary - Standby Servers page.
The following illustration shows the HaPrimary - Standby Servers page.
Parameters
The following table explains the HaPrimary - Standby Servers page parameters.
The following table explains the HaPrimary - Standby Servers page parameters.
Parameter
Description
Client
Displays the sequential client number in the list.
ClientId
The IP address of the standby server.
LinkStatus
(not in version 1.6.x)
The status of the link between the primary and
secondary servers at the time of the last screen refresh.
AdminState
(not in version 1.6.x)
Use to delete a standby server from a primary server. If
the USRM is being supervised by a DNCS, this field will
be updated to match the setting in the DNCS each time
the DNCS provisions the USRM.
ClientName
The name of the standby server.
ClientType
The type of client. The possible types are Admin and
Standby.
Standby - Indicates that a standby server is connected.
Admin - Indicates that an Admin terminal is connected.
Standby - Indicates that a standby server is connected.
Admin - Indicates that an Admin terminal is connected.
(An Admin terminal is used solely for administration
purposes.)
ConnectTime
Indicates the date and time the standby connected to the
primary.