Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 安装指南

 

78-4021139-01 Rev D 

309 

 

b   

Answer “yes” if you want to enable the first Ethernet device. If you answer 

“yes” to this question, you are prompted with question "b". 

Acquire eth0 info via DHCP? (yes/no)

 

Answer "yes" if you have a DHCP server you would like the machine to get 

its IP address from. If you answer “no”, you will be prompted with questions 

"c" and "d". 

Enter the IP address for eth0:

 

Answer this question with information provided by your network 

administrator. 

Enter the netmask for eth0:

 

Answer this question with information provided by your network 

administrator. 
Note: After answering these questions for eth0, you are prompted for the 

same information for eth1. Answer these questions as outlined above. 

Do you want to set a default gateway? (yes/no)

 

Answer "yes" if your network has a central server that routes all of the 

network traffic. If you answer "yes" to this question, you are prompted with 

question "f". 

Enter the IP address of the default gateway:

 

Enter the IP address of the central server that routes your network traffic. 

Do you want to set a nameserver? (yes/no)

 

Answer “yes” if you have a nameserver you would like the USRM Server to 

use. If you answer "yes" to this question, you are prompted with question "h". 

Enter the IP address of the nameserver:

 

Do you want to set a hostname? (yes/no)

 

Answer "yes" if you would like the machine to have a unique name on your 

network. If you answer “yes”, you will be prompted with questions "j" and 

"k". 

Enter the hostname:

 

Enter the domainname:

 

Do you want this USRM server be provisioned via SNMP? 
(yes/no)

 

Answer "yes" if you have a DNCS server or other SNMP provisioner on your 

network that you would like the USRM to acquire its provisioning from. If 

you answer “yes”, you will be prompted with question "m". 

Enter the SNMP Provisioner IP address:

 

Enter the SNMP Provisioner Host Name [dncsatm]: