Cisco DNCS System Release 2.7 3.7 4.2 安装指南
Chapter 2 Phase One - Perform Pre-Upgrade Checks
30
78-4003052-01 Rev G
3 Type bin and press Enter. The system sets the ftp transfer mode to binary.
4 Type hash and press Enter. The system configures itself to display hash marks
4 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
5 Type prompt and press Enter. This command turns off the interactive mode of
the FTP utility.
6 Type mget * and press Enter.
Note: This command starts the transfer of the files from the FTP server to the
DNCS. A # symbol displays on the screen for each 8192 bytes transferred from
the FTP server to the DNCS.
7 Are you planning to use the CVT download method?
If yes, complete the following steps:
a Type cd /pub/scicare/RELEASED/SettopResourceFile and press Enter.
a Type cd /pub/scicare/RELEASED/SettopResourceFile and press Enter.
b Type ls and press Enter.
c Type get settop.vxx and press Enter, where vxx is the set-top resource file
version.
Example: Type get settop.v91
Note: See the
Note: See the
ROM to Model Matrix (on page 107) for the correct set-top
resource file version.
If no, go to step 8.
8 Type bye and press Enter. This command closes the connection from the FTP
server.