Cisco DNCS System Release 2.7 3.7 4.2 安装指南
Chapter 3 Phase Two - Test New Software
60
78-4003052-01 Rev G
12 On the Set Up DHCT Download window, click Save.
Notes:
The image on the window may not match the image in this guide. The
software versions and the DHCT types and revisions may differ.
An emergency download begins instantaneously and no barker opens to the
subscriber.
Result: The Association Verification window opens.
13 Verify that the DHCT Type, Group, and Image File versions shown on the
Association Verification window are correct.
14 Configure the following fields on the Association Verification window:
Are you SURE you want to do this?: Type yes.
Enter your name: Type the name (in lowercase letters) you provided to Cisco
Services when you requested the secure GUI password.
Password: Type the password you received from Cisco Services.
15 Click OK.
Results:
The Association Verification window closes.
The Image List window is updated with the newly defined test download
schedule.
The software download to the DHCT test groups begins.
16 Do you have more devices or groups to test?
If yes, repeat steps 7 through 15 for each group being tested.
Note: Since a group can contain multiple DHCT types, you might have
Note: Since a group can contain multiple DHCT types, you might have
multiple downloads to the same DHCT group.
If no, in the Image List window, click File and select Close to return to the
Admin Console window.
17 Open an xterm window on the DNCS.
18 Type cd /export/home/dncs/doctor and press Enter.
18 Type cd /export/home/dncs/doctor and press Enter.