Cisco Cisco StadiumVision Mobile Reporter 安装指南

下载
页码 71
© 2011 Cisco Systems, Inc. All rights reserved   
Page 21 of 71 
 
 
 
 
 
Figure 12.  AC Power Supply 
 
 
Warning!  Blank faceplates and cover panels serve three important functions: 
they prevent exposure to hazardous voltages and currents inside the chassis; 
they contain electromagnetic interference (EMI) that might disrupt other 
equipment; and they direct the flow of cooling air through the chassis. Do not 
operate the system unless all cards, faceplates, front covers, and rear covers are 
in place. Statement 1029 
To maintain hot-swap capability, ensure that an active power supply is in both 
power supply slots before replacing (hot-swapping) a power supply. Check the 
power supply LED to determine which power supply module has failed. 
Warning! Never install an AC power module and a DC power module in the 
same chassis. Statement 1050 
AC Power Supply Input 
A single receptacle is provided at the rear of the AC power supply for AC input. 
Table 8 lists the pinout configuration for the connector. 
Table 8. 
Power Supply Connector pinout 
Pin Label 
-48 VDC Power Source 
– 
-48 VDC 
RTN (reference) 
Environmental Monitoring 
The SV Director Server has protection circuits that monitor and detect over-
current, over-voltage, and over-temperature conditions inside the appliance. If 
1  
Safety Lock (green) 
Status LED 
Handle