Cisco Laser Link Mainframes 安装指南
78-4004177-01 Rev D
Installation
2-9
Laser Link Mini-Mainframe Installation
Procedure
Follow these steps to install the Laser Link Mini-Mainframe.
1.
Position the Mini-Mainframe in the desired location, using two people to
support it until it can be secured with hardware.
Note: The Laser Link Mini-Mainframe is intended for installation and
Note: The Laser Link Mini-Mainframe is intended for installation and
operation in a restricted access area.
2.
Secure the Mini-Mainframe into position from the front using the rack clips
and mounting screws provided. Tighten screws using a #2 Phillips-head
screwdriver.
Note: The Mini-Mainframe is equipped with 19-inch mounting brackets.
Note: The Mini-Mainframe is equipped with 19-inch mounting brackets.
3.
Place self-adhesive fiber routing clips in the appropriate position on the Mini-
Mainframe (in front of the module’s right/left side fiber connector, ½ inch in)
to secure the module’s routed fiber.