Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 143 of 169
nsc(policy-mgr) /org/policy # scope syslog EaSysPA12
nsc(policy-mgr) /org/policy/syslog # send-syslog critical messagetext
nsc(policy-mgr) /org/policy/syslog #
Working With the Console Attribute
You create the console attribute. Once created, you can enable or disable it. You can also set the console attribute.
When you set it, you are assigning the attribute a severity level.
When you set it, you are assigning the attribute a severity level.
This section includes the following topics:
●
●
●
●
Creating the Console Attribute
You can create the console attribute.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope syslog <policy-name>
5. create console
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope syslog
Example:
nsc(policy-mgr) /org/policy # scope log
EaLogPA11
Places you in log mode.