Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
Stack Commands
164
78-21491-01 Command Line Interface Reference Guide
8
Parameters
unit-id
—
Select a specific unit. All commands after this command refer to this unit.
In Standalone mode or if there is only a single unit in the stack, this parameter
cannot be entered. (Range: 1–8).
cannot be entered. (Range: 1–8).
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Examples
Example 1 (For Sx500 devices)—Enter Stack Unit mode on unit 2 and configure it.
switchxxxxxx# stack unit 2
switchxxxxxx(sx500)# native s1—s2 5g unit-id-auto reboot
s
Example 2 (For Sx500 devices)—Enter Stack Unit mode on a device with only one
unit in it.
unit in it.
switchxxxxxx# stack unit
switchxxxxxx(sx500)# native s1—s2 5g unit-id-auto reboot
Example 3 (For SG500X/ESW2-550X devices)—Enter Stack Unit mode on unit 2
and configure it.
and configure it.
switchxxxxxx# stack unit 2
switchxxxxxx(sg500x)# native s1—s2-5g 5g unit-id-auto reboot
s
Example 4 (For SG500X/ESW2-550X devices)—Enter Stack Unit mode on a
device with only one unit in it.
device with only one unit in it.
switchxxxxxx# stack unit
switchxxxxxx(sg500x)# native s1—s2-5g 5g unit-id-auto reboot
Example 5 (For SG500XG devices)—Enter Stack Unit mode on a device with only
one unit in it.
one unit in it.
switchxxxxxx# stack unit