Samsung MX-FS9000 用户手册
12
English
English
13
Basic Functions
4. Press the ENTER button on the remote control.
The selected file will be deleted.
☛
The NTFS file system is not supported.
To Skip Next 10 Files
1. Press the +10 or -10 button while in playback mode.
This will skip the files as many as 10 or -10 from the
current file.
current file.
Move FOLDER
Press the remote control's TUNING/ALBUM ,,. button
to move to the previous/next folder.
to move to the previous/next folder.
How to safely remove the USB device
1. Press the
(@)
button twice while the USB is playing and
press the
(@)
button once when it is at a block state.
2. If a REMOVE message appears on screen, remove the
USB device.
Before Using the USB Storage
• Some USB devices may not work properly with this
product.
• This product supports only an external HDD that is
formatted in FAT file system.
• USB 2.0 HDD should be connected to a separate power
source. Otherwise, the USB 2.0 HDD will not work at all.
• If an USB external storage is connected to multiple devices,
only the MP3 files in the first HDD will be played.
• DRM-applied files are not supported. Digital Right
Management: This will restrict unauthorized access to a
DRM file so that the copyright of the file is protected from
piracy.
DRM file so that the copyright of the file is protected from
piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of a MP3/WMA file are
• Only the first 15 characters of a MP3/WMA file are
displayed.
• Only removable HDDs with less than 160GB are supported.
Depending on the device, a 160GB- or more removable
HDD may not be supported.
HDD may not be supported.
• It will take several minutes to recognize the files in the
selected USB device.
• The USB device (USB HDD, in particular) may cause a
delay to move to the next file.
• The USB storage supporting only USB VER1.1 may perform
a slow access or may not recognize the file properties.
• The maximum current supported by an external USB
device via each USB port is 0.5A (based on DC 5V).
• A certain USB, digital camera device, USB card reader,
iPod, iPhone or Smart Phone may not be supported.
Bluetooth
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth
compliant devices to interconnect easily with each
other using a short wireless connection.
• A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body is in contact with the receiving/
transmitting system of the Bluetooth device or the Hi-Fi
Component.
Component.
- It is subject to electrical variation from obstructions caused
by a wall, corner, or office partitioning.
- It is exposed to electrical interference from same frequency-
band devices including medical equipment, microwave
ovens, and wireless LANs.
ovens, and wireless LANs.
• Pair the Hi-Fi Component with the Bluetooth device while
they are close together.
• The further the distance is between Hi-Fi Component and
Bluetooth device, the worse the quality is. If the distance
exceeds the Bluetooth operational range, the connection is
lost.
exceeds the Bluetooth operational range, the connection is
lost.
• In poor reception-sensitivity areas, the Bluetooth connection
may not work properly.
• The Bluetooth connection only works when it is close to
the set. The connection will be automatically cut off if the
distance is out of this range. Even within this range, the
sound quality may be degraded by obstacles such as walls
or doors.
distance is out of this range. Even within this range, the
sound quality may be degraded by obstacles such as walls
or doors.
• This wireless device may cause electric interference during
its operation.
To connect the Hi-Fi Component to a
Bluetooth device
Bluetooth device
Check if the Bluetooth device supports the Blue-
tooth compliant stereo headset function.
1. Press the CD/Bluetooth button of the Hi-Fi Component
to display the BLUETOOTH message.
• You will see WAIT for a while and then READY on the
front display of the Hi-Fi Component.
2. Select the Bluetooth menu on the Bluetooth device you
want to connect. (Refer to the Bluetooth device's user
manual.)
3. Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] HI-FI XXXXXX" from the list.
• When the Component is connected to the Bluetooth
device, it will display CONNECTED ➞ BLUETOOTH
on the front display.
on the front display.
MX-FS9000-ZC-ENG_130927.indd 12
2013-09-27 �� 1:35:07