Samsung MX-FS9000 用户手册

English

Basic functions

• If the Bluetooth device has failed pair with the

Component, delete the previous “[Samsung] HI-FI
XXXXXX” found by the Bluetooth device and make it
search for the component again.

5. Play music on the connected device.

• You can listen to the music playing on the connected

Bluetooth device over the Hi-Fi Component system.

• In

Bluetooth

mode, some model's Play/Repeat/Stop/

Next/Back functions are not available.

➣

The product only supports Middle Quality SBC data (up

to 237kbps@48kHz), and does not support High Quality

SBC data (328kbps@44.1kHz).

• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports the

A2DP (AV) function.

• You cannot connect to a Bluetooth device that

supports only the HF (Hands Free) function.

• Only one Bluetooth device can be paired at a time.
• Once you have turned off Hi-Fi Component and the

pairing is disconnected, the pairing will not be restored
automatically. To reconnect, you must pair the device
again.

• Search or connection may not be performed properly

by Hi-Fi Component in the following cases.

- If there is a strong electrical field around Hi-Fi

Component.

- If several Bluetooth devices are simultaneously paired

with Hi-Fi Component.

- If the Bluetooth device is turned off, not in place, or

malfunctions.

- Note that such devices as microwave ovens, wireless

LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
which can cause electric interference.

To disconnect the Bluetooth device from
Hi-Fi Component

You can disconnect the Bluetooth device from Hi-

Fi Component. For instructions, see the Bluetooth
device's user manual.

• Hi-Fi Component will be disconnected.
• When Hi-Fi Component is disconnected from the Bluetooth

device, Hi-Fi Component will display DISCONNECTED ➞
READY on the front display.

To disconnect Hi-Fi Component from
the Bluetooth device

Press the CD/Bluetooth button on the front panel

of Hi-Fi Component to switch from Bluetooth mode

to another mode or turn off Hi-Fi Component.

• The connected Bluetooth device will wait a certain time for

a response from Hi-Fi Component before terminating the
connection.(Disconnection time may differ, depending on
the Bluetooth device)

• The currently connected device will be disconnected.

➣

In Bluetooth connection mode, the Bluetooth connection

will be lost if the distance between the Hi-Fi Component
and the Bluetooth device exceeds (5 meters).

• If the Bluetooth device comes back into the effective

range and then again connect after disconnecting, you
can restart to restore the pairing with the Bluetooth
device.

• Hi-Fi Component automatically turns off after 25

minutes in the Ready state.

Using My Karaoke

You can use MY Karaoke function to sing along

with your favorite CDs and USB.

1. Connect the microphone to the MIC jack on the front

of the product.

If your microphone jack is larger than 3.5 (ø) MIC
jack, you need a Connector-Adaptor(optional) to
complete the connection.

First, connect the Connector-Adaptor to the MIC jack on

the front of the product,

Second, connect the microphone (with larger jack) to
the Connector-Adaptor.

2. Press the MIC VOL-, + button on the remote

control to adjust the volume of the microphone.

3. Press the MY KARAOKE button on the remote

control to suppress the vocal if you need. Each time
the button is pressed, the selection is changed as
follows:
MY KARAOKE ON ➞ MY KARAOKE OFF

If you hear strange noises (squealing or howling)
while using the Karaoke feature, move the
microphone away from the speakers. Turning down
the microphone's volume or the speaker volume is
also effective. Do not set the MICROPHONE towards
the SPEAKER.

The microphone does not operate in the AUX and
TUNER mode.

If you connect with the Microphone, GIGA SOUND
will automatically turn off. Even if you remove the
microphone, it will not turn on.

MX-FS9000-ZC-ENG_130927.indd 13

2013-09-27 �� 1:35:07