Samsung Galaxy Tab 2 10.1 用户手册
The pairing and connection status is displayed below the target device name in the Paired
devices section. When the target device is connected to your device,
displays in the status
bar.
Connect to a Paired Device
When you have paired another Bluetooth device with your device, you should be able to
reconnect it automatically by turning on Bluetooth on both devices. However, sometimes you
will need to reconnect manually, for example if you have been using your headset with another
Bluetooth device.
1. Press
and tap
>
> Bluetooth.
2. If Bluetooth is not on, tap the ON/OFF slider to turn it on.
3. Make sure that the headset is discoverable.
4. Tap the headset’s name in the Bluetooth devices section.
Note:
If you cannot reconnect to the target device, follow the instructions in
Disconnect from a Bluetooth Device
Disconnecting does not unpair the devices, so you can connect the devices at another time.
1. Press
and tap
>
> Bluetooth.
2. In the Bluetooth devices section, tap
next to the device to unpair, and then tap
Unpair
.
3. Tap Disconnect.
Unpair from a Bluetooth Device
When you unpair from a Bluetooth device, the devices will no longer connect automatically. To
connect to the other device again, you’ll need to pair with the device again.
1. Press
and tap
>
> Bluetooth.
2. In the Bluetooth devices section, tap
next to the device name, and then tap
Unpair
.
Tools and Calendar
109