Apple appleshare ip 6.0 快速安装指南
Installing AppleShare IP 6.0
19
Because of the disadvantages of using dynamic addresses, Apple recommends you obtain a
static IP address for each computer on which you will install AppleShare IP services.
static IP address for each computer on which you will install AppleShare IP services.
If your computer uses a modem to connect to your Internet service provider and has a static
IP address, follow these steps to set up TCP/IP and PPP:
IP address, follow these steps to set up TCP/IP and PPP:
1
Open the TCP/IP control panel.
If TCP is inactive, the following dialog box appears.
2
Click Yes.
The TCP/IP control panel appears.
3
Choose User Mode from the Edit menu.
The User Mode window appears.
4
Click Basic, if it’s not already chosen. Then click OK.
The TCP/IP window shows the basic TCP/IP options.
Important
If your ISP has provided you with software that automatically configures your
TCP/IP control panel, do not change the settings made by the ISP software program. Skip
ahead to “Setting Up Energy Saver” on page 23.
ahead to “Setting Up Energy Saver” on page 23.