Apple appleshare ip 6.1 快速安装指南

Installing Your Software

15

Note:  If you used the Mac OS Setup Assistant after installing Mac OS 8.5, you can skip ahead 
to “Setting Up Energy Saver” on page 23.

To set up the AppleTalk control panel, follow these steps:

1

Open the AppleTalk control panel. 

2

Choose the network connection type that you want AppleTalk to use from the “Connect via” 
pop-up menu.

This setting determines the default port that your server will use to connect to your 
AppleTalk network.

If the default port becomes unavailable (for example, if your Ethernet cable becomes loose), 
AppleTalk will choose another available network connection type. 

3

If your network has zones, choose the zone for your AppleShare IP Web & File Server from 
the “Current zone” pop-up menu.

Zones are groups of devices arranged according to logical categories, such as usage or 
geography. If your network has a router (a device used to connect networks), then it has 
zones. Your server will appear in this zone in the Chooser. 

If your network does not have a router, all computers connected to the network are in the 
same zone, and you see “no zones available” instead of the pop-up menu. 

4

Close the AppleTalk control panel and save your changes.

Your changes are saved and take effect immediately.

Setting Up TCP/IP

For users to share files over TCP, visit your Web site, print over TCP, or use TCP-based client 
mail or FTP applications, and for you to use the TCP Filter software, you need to set your 
computer’s network connections in the TCP/IP control panel. However, you don’t need to 
follow the instructions in this section if

m you completed the Internet Setup Assistant after installing Mac OS 8.5. Skip ahead to 

m your Internet service provider gave you software that automatically configures your TCP/