Apple appleshare ip 6.1 快速安装指南

16

Chapter  1

m you have already set up your TCP/IP control panel. If you will be running any AppleShare 

IP services with a modem (or “dial-up”) connection to the Internet, skip ahead to “Setting 
Up TCP/IP and Remote Access (for Modem Access Only)” on page 17. If you won’t be 
using a modem connection, skip ahead to “Setting Up Energy Saver” on page 23.

To set up the TCP/IP control panel, follow these steps:

1

Open the TCP/IP control panel.

If TCP/IP is inactive, the following message appears.

2

Click Yes.

3

Choose User Mode from the Edit menu.

4

In the User Mode window, click Basic, if it’s not already chosen. Then click OK.

The TCP/IP window shows the basic TCP/IP options. 

5

Choose the network connection you are using to connect over TCP/IP from the “Connect via” 
pop-up menu.

This setting determines the port that your server will use to connect to your TCP/IP network.

6

Choose Manually from the Configure pop-up menu.