ASUS mypal a600 用户手册
Avolites Pearl 2000 Operators Manual - page
45
P2000MAN.DOC 19/10/99 17:59
⇒
Viewing Screen 9 (patch by Handle) will give you some helpful
information about the Fixtures you are patching, such as DIP switch
settings, (DIP stands for Dual In Line Package and it wasn’t invented by
Avolites!), DMX numbers etc. See Section 9.2.9 Screen 9 - VIEW
PATCH BY HANDLE.
settings, (DIP stands for Dual In Line Package and it wasn’t invented by
Avolites!), DMX numbers etc. See Section 9.2.9 Screen 9 - VIEW
PATCH BY HANDLE.
5.8 Patching a combination of Intelligent Fixtures and Dimmer Channels
Patch your Intelligent Fixtures as described in Section 5.7 Patching
Intelligent Fixtures. They will be patched onto ADD buttons, and their
Intensities will appear in Preset Channels 1 - 30. You can only patch one
Intelligent Fixture onto each Handle.
Intelligent Fixtures. They will be patched onto ADD buttons, and their
Intensities will appear in Preset Channels 1 - 30. You can only patch one
Intelligent Fixture onto each Handle.
Patch your Dimmer DMX Channels as described in 5.5 Patching
Conventional lights, but only patch them onto SWOP buttons. Their
Intensities will appear in Preset Channels 31 – 60. You can patch as many
Dimmer DMX Channels as you like onto each Dimmer Preset.
Conventional lights, but only patch them onto SWOP buttons. Their
Intensities will appear in Preset Channels 31 – 60. You can patch as many
Dimmer DMX Channels as you like onto each Dimmer Preset.
This means that on Pearl 2000 you can patch up to 120 Intelligent Fixtures,
plus up to 120 Dimmer Presets.
plus up to 120 Dimmer Presets.
If you are not using 120 Intelligent Fixtures, you can patch additional Dimmer
channels onto any unused ADD buttons, making up to a maximum of 240
Dimmer Presets if you have no Intelligent Fixtures at all.
channels onto any unused ADD buttons, making up to a maximum of 240
Dimmer Presets if you have no Intelligent Fixtures at all.
5.9 Quickly creating a 1 to 1 Dimmer patch
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the PATCH button on the blue Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
The VGA Screen will automatically change to show which DMX addresses are in use
.
Selecting page 0 will allow you to patch Preset Faders 001 – 060.
Selecting page 1 will allow you to patch Preset Faders 101 – 160
Selecting page 2 will allow you to patch Preset Faders 201 – 260.
Selecting page 3 will allow you to patch Preset Faders 301 – 360
•
Press Softbutton A [DIMMER].
Screen asks you to enter a DMX number and
patch it to an ADD or SWOP button.
•
If you wish to change the DMX line you are patching onto, press
Softbutton E [SELECT A DMX LINE], then press Softbutton A – D to
select the respective DMX line.
select the respective DMX line.
Menu autoexits to PATCH DIMMER OR DEVICE
menu.
•
Press and hold down the grey Preset ADD button number 1
. The Preset A
and B LED’s will flash once.
•
Whilst still holding this press and release the grey Preset ADD button
number 30.
The Preset A and B LED’s will turn on whilst the desk is computing the
patch and will then go out.
•
Select the Page of Fixtures that you want to patch onto.
•
Select another Page of Fixtures and repeat the process if required.
You
can patch a maximum of 120 Dimmer Presets in this way.