ASUS mypal a600 用户手册
Avolites Pearl 2000 Operators Manual - page
47
P2000MAN.DOC 19/10/99 17:59
The desk will make the patch, and the displaced Fixture that formerly
occupied the DMX Address will be Parked. The Handle will still exist, but
without any DMX Channels patched onto it. To see whether any Fixtures
remain Parked at the end of a Repatch, you can View the Fixture Patch.
(See section 5.2.2 Viewing the Fixture Patch (Patch by Handles)). Any
Fixtures left Parked are marked as such under the DMX address column.
occupied the DMX Address will be Parked. The Handle will still exist, but
without any DMX Channels patched onto it. To see whether any Fixtures
remain Parked at the end of a Repatch, you can View the Fixture Patch.
(See section 5.2.2 Viewing the Fixture Patch (Patch by Handles)). Any
Fixtures left Parked are marked as such under the DMX address column.
The programming associated with the Fixture is preserved, and you need to
patch a new DMX address onto a vacant Handle to control it.
patch a new DMX address onto a vacant Handle to control it.
To repatch a Fixture :
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the PATCH button on the blue Program Select bank.
Puts you in the
PATCH DIMMER OR DEVICE menu.
The VGA Screen will automatically change to show which DMX addresses are in use
.
⇒
Remember that patching a Dimmer onto a Handle already occupied by
another Dimmer simply adds the new Dimmer to the Handle.
⇒
If you need to repatch a Fixture like the VL5
TM
Wash Luminaire, which
combines an Intelligent Fixture with a normal Dimmer Channel, you will
need to repatch both the Fixture and the Dimmer.
need to repatch both the Fixture and the Dimmer.
Do not delete anything or your programming may be lost!!
5.13 Changing the Handle of a Dimmer or Fixture
To change the Handle of a Dimmer or Intelligent Fixture, simply patch it
again onto another Handle. You will have to press ENTER to confirm the
move.
again onto another Handle. You will have to press ENTER to confirm the
move.
Changing the Handle of a Dimmer or Intelligent Fixture loses all the
Programming for that device.
Programming for that device.
5.14 Deleting a DMX assignation
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
•
Press the PATCH button on the blue Program Select bank
. Puts you in the
PATCH DIMMER OR DEVICE menu.
•
Press the DELETE button on the blue Program Select bank.
Its LED
flashes.
•
Type in the number of the DMX Channel you want to clear.
•
Press ENTER.
•
Press Softbutton E [REPATCH FIXTURES] .
Puts you into the REPATCH
FIXTURE menu.
•
Enter the new DMX start address for the Fixture that you want to repatch.
If you need to repatch onto a different DMX output, press Softbutton E
[SELECT A DMX LINE], then choose a new DMX output from the menu.
[SELECT A DMX LINE], then choose a new DMX output from the menu.
•
Press the blue SWOP button of the Handle of the Fixture you wish to
repatch, ensuring that you are on the correct Page of Fixtures.
•
Press ENTER to confirm the change.