Antares auto-tune-for tdm and vst 用户手册
Auto-Tune UserÕs Manual
43
Automatic Mode Controls
arate from the other scales. If a seven tone scale is being edited, the Edit
Scale dialog appears:
Scale dialog appears:
The top line shows the current scale as selected from the Scale popup. The
second line shows the current key.
second line shows the current key.
The left most column is labelled Òdo not trackÓ. Clicking in this column
places a ÒchkÓ indicator. This has the effect that when the pitch of the
incoming sound is close to a tone so edited, the output pitch is not changed
from the input. This is like a pitch dependent bypass.
places a ÒchkÓ indicator. This has the effect that when the pitch of the
incoming sound is close to a tone so edited, the output pitch is not changed
from the input. This is like a pitch dependent bypass.
The next column is labeled ÒremoveÓ. Clicking in this column causes the
tone to be removed from the scale, as if it were never there to begin with.
tone to be removed from the scale, as if it were never there to begin with.
The next column is the note name as derived from the key. The right col-
umn is pitch in cents relative to the Þrst tone of the scale. Internally, these
numbers are stored to two decimal places.
umn is pitch in cents relative to the Þrst tone of the scale. Internally, these
numbers are stored to two decimal places.
If a scale with more than seven tones is being edited, the Edit Scale dialog
appears:
appears: