Asrock A75 Pro4 用户手册

44

2.16  Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical 
drive   rst. Then, the drivers compatible to your system can be auto-detected and 
listed on the support CD driver page. Please follow the order from up to bottom side 
to install those required drivers. Therefore, the drivers you install can work properly.

2.17  Installing Windows

®

 7 / 7 64-bit / Vista

TM

 / Vista

TM

 64-bit / XP / 

         XP 64-bit With RAID Functions

If you want to install Windows

®

 7 / 7 64-bit / Vista

TM

 / Vista

TM

 64-bit / XP / XP 64-bit 

on a RAID disk composed of 2 or more SATA3 HDDs with RAID functions, please 
follow below procedures according to the OS you install.

2.17.1  Installing Windows

®

 XP / XP 64-bit With RAID Functions

If you want to install Windows

®

 XP / XP 64-bit on a RAID disk composed of 2 or 

more SATA3 HDDs with RAID functions, please follow below steps.

STEP 1: Set up UEFI.
A. 

Enter UEFI SETUP UTILITY    Advanced screen     Storage  

 

 Con  guration.
B.   

Set the “SATA Mode” option to [RAID]. 

 disk.) 
A.  

Insert the ASRock Support CD into your optical drive to boot your system. 

B.  

During POST at the beginning of system boot-up, press <F11> key, and

 

then a  window for boot devices selection appears. Please select CD-ROM 
as the boot device.

C. 

When you see the message on the screen, “Generate Serial ATA driver 
diskette [YN]?”, press <Y>.

D. 

Then you will see these messages, 

 

 

Please insert a   oppy diskette into the   oppy drive, and press any key.

E.  

The system will start to format the   oppy diskette and copy SATA3 drivers 
into the   oppy diskette.