Asrock A75 Pro4 用户手册

2.17.2 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit With

RAID

Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit on a RAID disk

composed of 2 or more SATA3 HDDs with RAID functions, please follow below
steps.

STEP 1: Set up UEFI.
A.

Enter UEFI SETUP UTILITY Advanced screen Storage

Con guration.
B.

Set the “SATA Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID confi guration.

Before you start to con gure RAID function, you need to check the RAID installation
guide in the Support CD for proper con guration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide

STEP 3: Make a SATA3 Driver Diskette.
Make a SATA3 driver diskette by following section 2.17.1 step 2 on page 44.
STEP 4: Install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit OS on your

system.

STEP 3: Use “RAID Installation Guide” to set RAID confi guration.

STEP 4: Install Windows

XP / XP 64-bit OS on your system.

After step 1, 2, 3, you can start to install Windows

XP / XP 64-bit OS on your

system. At the beginning of Windows

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SATA3 driver diskette containing the AMD RAID
driver. After reading the oppy disk, the driver will be presented. Select the driver to
install according to the OS you install.