Asrock n61p-gs 用户手册

2 6

2.12

2.12 Driver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.13

2.13 Installing Windows

Installing Windows

2000 / XP / XP 64-bit / Vista

/ Vista

64-bit W

64-bit Without RAID F

ithout RAID F

ithout RAID Functions

unctions

If you just want to install Windows

2000, Windows

XP, Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit on your SATA / SATAII HDDs without RAID functions,

you don’t have to make a SATA / SATAII driver diskette. Besides, there is no need for you

to change the BIOS setting. You can start to install Windows

2000, Windows

XP,

Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit on your system

directly.

2.14

2.14 Installing Windows

Installing Windows

2000 / XP / XP 64-bit / Vista

/ Vista

64-bit W

64-bit With RAID F

ith RAID F

ith RAID Functions

unctions

If you want to install Windows

2000, Windows

XP, Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit OS on your SATA / SATAII HDDs with RAID

functions, please follow below procedures according to the OS you install.

Before installing Windows

2000 to your system, your Windows

2000 optical

disk is supposed to include SP4. If there is no SP4 included in your disk, please

visit the below website for proper procedures of making a SP4 disk:

http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay

2.14.1 Installing Windows

2000 / XP / XP 64-bit With RAID

Functions

unctions

If you want to install Windows

2000, Windows

XP or Windows

XP 64-bit on your

SATA / SATAII HDDs with RAID functions, please follow below steps.

STEP 1: Set Up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [IDE].

STEP 2: Make a SATA / SATAII Driver Diskette.

Insert the ASRock Support CD into your optical drive to boot your system.

(There are two ASRock Support CD in the motherboard gift box pack, please

choose the one for Windows

2000 / XP / XP 64-bit.)