Asrock n61p-gs 用户手册

2 7

2.14.2 Installing Windows

Vista

/ Vista

64-bit With

RAID F

RAID Functions

unctions

If you want to install Windows

Vista

or Windows

Vista

64-bit on your SATA /

SATAII HDDs with RAID functions, please follow below steps.

NOTE. If you install Windows

2000 / Windows

XP / Windows

XP 64-bit on IDE

HDDs and want to manage (create, convert, delete, or rebuild) RAID functions

on SATA / SATAII HDDs, you still need to set up “SATA Operation Mode” to [RAID] in

BIOS first. Then, please set the RAID configuration by using the Windows RAID

installation guide in the following path in the Support CD:

.. \ RAID Installation Guide

During POST at the beginning of system boot-up, press <F11> key, and

then a window for boot devices selection appears. Please select CD-ROM

as the boot device.

When you see the message on the screen, “Generate Serial ATA driver

diskette [YN]?”, press <Y>.

Then you will see these messages,

Please insert a blank

formatted diskette into floppy

drive A:

press any key to start

Please insert a floppy diskette into the floppy drive, and press any key.

The system will start to format the floppy diskette and copy SATA / SATAII

drivers into the floppy diskette.

STEP 3: Set Up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [RAID].

STEP 4: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 5: Install Windows

2000 / Windows

XP / Windows

XP 64-bit OS on

your system.

You can start to install Windows

2000 / Windows

XP / Windows

XP 64-bit OS on your

system. At the beginning of Windows

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SATA / SATAII driver diskette containing the NVIDIA

RAID driver. After reading the floppy disk, the driver will be presented. Select the driver to

install according to the mode you choose and the OS you install.